Multiple pen cases

I have made a few multiple pen cases this is one of the most unusual.
The brief was to make a case for three desk pens which are 8 inches long.

My starting point for this project was to create three tubes of Kydex.


When the three tubes were finished I used them to form the leather outer shell


As the shell was drying I removed the tubes and wrapped each one in yellow Nappa leather which is very soft.


As the outer was drying I started to apply the dye in this picture you can see the three pen case as well as the leather for a matching single pen case.
I had been asked to create a wrap around closure for this case which is also there.


I then put everything together and added some glue.


After marking the stitching holes I sewed the case together


The mini logo on the end of the thong was made from a piece of brass.


The finished pair



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s